Archive for March, 2010

A quarter of the battery situation has improved but it is too early to the global economic recovery

Posted by admin on March 29, 2010
Netbook / Comments Off

Recently, some Western countries, economic indicators improved. In the United States, even though the U.S. economy and financial system is still weak, but benefited from economic policies to stimulate the onset of the recent economic data show that the economy is expected to short-term rebound, consumer and real estate market has stabilized, rapid increase in government investment, tax cuts The effect may be apparent soon. omnibook xe3 battery,hp 346970-001.

The first quarter of this year, U.S. consumption is expected to reverse the trend of last year’s sharp drop in the second half in favor of experienced positive growth. The earliest in the second quarter, it is likely to see positive growth in GDP.

National economic trends

Since the beginning of this year’s monthly real estate data show that the U.S. housing market downturn may have bottomed out. Housing starts and sales data, second-hand housing sales data are better than expected. Despite the current housing forfeiture rate remains high, which means the issue of existing housing stock will continue for some time, but will not be an area of housing construction is expected to continue to decline. As a result, the past few years has been a drag on GDP-quarter annualized growth rate of about 1 percentage point of the factors that basically been eliminated. hp hstnn-db02 , hp hstnn-ub02.

Inventories of new homes has fallen to the lowest since 2001/2002, but real estate prices have basically dropped buyers do not think the price too expensive levels. Coupled with low mortgage interest rates, consumers will start buying houses some recovery, real estate developers have begun to turn optimistic expectations.

We use weekly release of high-frequency data (including the University of Michigan index of consumer expectations, stock prices, real estate loans Mortgage Bankers Association’s refinancing index, ICSC chain store sales data, etc.) made by the actual quarterly consumption growth forecast, a quarter of U.S. consumption growth likely to rebound to 1% -1.5%, in the second quarter are more likely to rise to more than 2%.hp dp390a , hp pp2100.

The contribution of inventories for growth will be likely in the second quarter from negative to positive. However, investment, exports and corporate profits will continue to rapidly decline. Thus, the GDP growth will be positive growth in the high unemployment rate (expected to exceed 9%) accompanied. At the same time, despite the Federal Reserve is committed to the rapid creation of money and expand its balance sheet, the risk of deflation will continue to rise, the core consumer price index is expected by the end of 2010 will drop to near zero levels. In addition, the Finance Minister Geithner recently proposed plan to rescue the financial system could work, but also hard to say. If this effort ultimately failed, then the U.S. economy in 2010 may be a “second bottom” and re-entering a recession.

On the other side, Europe and Japan, economic indicators are not so encouraging. Eurozone industrial value added in the first quarter of the chain contraction rate, is likely to exceed last year’s fourth quarter of 6%. United Kingdom and Sweden, as well as other Central and Eastern European countries, in similar, or even worse.presario r3000 battery , presario x6000 battery.

However, is not completely good news. Early to stimulate economic policies, such as lower interest rates and inflation rates, speed up the European family deleveraging process. The U.S. economy and global trade and industrial production, the recent signs of recovery, mean that Europe’s industrial production is expected to stabilize the near future. Europe’s main problem is that its internal trade between countries due to a sharp decline in consumption of contraction. This situation is of European countries the household sector deleveraging is still underway, consumer demand is still weak, is likely to continue for some time.

Japan’s February industrial production fell by 9.4% in the chain, down 38.4%, the highest on record low. Sub-industry perspective, in addition to oil and coal industry chain growth, all sectors are experiencing negative growth, of which the transport equipment manufacturing industry, the most dramatic decline (-23.2%). Exports were down 6.8%, inventories were down 4.2%, indicating that inventory adjustment process is still underway, but due to the decline in exports, inventory ratio is still rising. Japan is expected to one-quarter industrial production will continue to shrink, the chain might once again recorded double-digit GDP negative growth.pavilion zv5000 battery , pavilion zv6000 battery.

The good news is that in March the U.S. manufacturing sector index rose 0.5 percentage points to 36.3, more than ring up for three consecutive months, indicating that the U.S. manufacturing slump has eased. Over the previous month, new orders index rose by 8.1 percent in December compared with last year’s rebound in the bottom of 18.1 percentage points. Typically, the U.S. manufacturing ISM index of leading Japanese manufacturing production for about six months, so the Japanese manufacturing production may rebound in the bottom quarter of this year 23.pavilion dv1000 battery , pf723a , hp 367759-001.

BYD energy from the battery to the new king of pacemaker

Posted by admin on March 29, 2010
Netbook / Comments Off

In many people’s eyes, BYD some “arrogant”:

“Our goal is to passenger car sales in 2015 first in the country, in 2025 the world’s first!” Two years ago, BYD, founder of Wang Chuanfu an amazing phrase.

In some people’s eyes, BYD also brings a “magic.”

“Stock god” Buffett shares, do not rely on the world’s first commercial charging station electric vehicle F3DM market, with Germany’s Volkswagen vehicle batteries cooperation agreement signed by … …

The reality of BYD, has been using to break the traditional way of thinking, different from ordinary people’s innovation model, in the voices of doubt to create a high-growth miracle.

Process Innovation: Man + Machine = automated

Many people may not know that he used in Motorola, Nokia, Samsung and other foreign brands mobile phone battery, the overwhelming majority of BYD production. Industry statistics show that, at present, BYD Li-ion battery to 30% of the mobile phone market share ranks first in the world.

However, in 1995, BYD was first established, rechargeable battery market is still dominated by Japanese companies. At that time, Japan, a nickel-cadmium hp f4098a , hp f4809a production lines offer a few thousand yuan, but also prohibited the export. BYD fledgling production line through the dismantling process, the foreign advanced automatic production line can be decomposed into a month to complete the process manually, the core part of using automation and control, and other links to complete by hand. Finally, just spent more than 100 million yuan, we built a 4000 Nissan nickel-cadmium battery production line.

“Man + Machine = automated” process of creative transformation of BYD, the battery manufacturer in this capital-intensive industry into a labor-intensive industries, to maximize the technology combined with China’s manpower advantage in the successful control products at the same time the quality of, access to foreign competitors prices and the cost advantage is difficult.

In 2000, BYD began to enter the field of lithium hp f4812a ,compaq 319411-001 production. In 2001, BYD Li-ion battery market share, the company has quickly risen to fourth in the world, while nickel-cadmium and nickel-metal hydride batteries rose to the second and third.

Vertical integration: the core technology breakthroughs and cost control problems

BYD visited people, without exception, by its huge industrial chain of the shock.

In the IT industry group, BYD’s product line has expanded to liquid crystal display, presario 2100 battery , presario 2500 battery,plastic shell, aluminum-magnesium alloy casing, flexible circuit boards, cameras, mobile phone parts, and began to offer “one-stop” services.

In the automobile industry group, BYD’s approach is for the industry peers sidelong glance.

A long time, the car is a diversified division of labor, one of the most mature industries. Tens of thousands of parts and components required for a car, are to be procured outside, so that they can better cost control.

BYD did the opposite. In addition to glass and tires, presario nx9010 battery, presario nx9000 battery,components, almost all of its own R & D production.

Die company established in Beijing, in Shanghai vehicle R & D center in Shenzhen, the layout engine R & D and production centers … … three years time, BYD completed the vertical integration of the automobile industry. In 2006, the first all-new model BYD F3, by virtue of the excellent quality, innovative marketing tools, semi-annual sales of 32500. Then, again with a 13-month cumulative sales break 10 million sets. In the first five months, total sales of BYD Auto 142.5 thousand, an increase of 191%.

Ferrosilicon strategy: make new energy “pacemaker”

BYD to do almost anything, but only does not produce gearbox. “In the future do not need to gear the car!” Wang Chuanfu again, that really surprises people. In his eyes, car, sooner or later is dominated by electric hp 367759-001,hp f2019a vehicles, electric cars are no gearbox.

Wang Chuanfu from his 10 years of lung power to the vehicle battery tireless research, as well as his doorstop – high-capacity, high security, low-cost iron battery.

December 15, 2008, carrying iron battery, and a 1.0-liter engine F3DM BYD dual-mode electric vehicle market in Shenzhen took the lead. This took five years and invested more than 500 R & D personnel and R & D out of one billion yuan plug-in hybrid cars, mobile phones can be the same as a home outlet charge, 7 hours, or be a breakthrough in electric vehicles required in the professional Charging Station Charging bottleneck.

Three electric cars only his dream of a new energy.

The BYD factory in Shenzhen, there is a villa consisting of two “future village.” Here, there is one from the 110-iron hp f2019b , omnibook 6000 battery energy storage plant consisting of one megawatt. It can be the night’s “Valley electricity” save up daytime use; also be able to rooftop solar panels and windmill in the yard or intermittent issued by the uneven distribution of electricity storage down, so that solar, wind and other renewable energy grid – generation becoming more stable. In addition, solar power projects, BYD to invest 25 billion yuan, is using its technological advantages to enhance the conversion efficiency of photovoltaic cells, in-depth integration of solar cell industry chain.

BYD will firmly be in electric vehicles, energy storage and solar power stations in three areas of the early realization of a new breakthrough.

Germany has nearly half the number of solar cell components

Posted by admin on March 26, 2010
Netbook / Comments Off

According to industry estimates, Germany has the world’s nearly half of the solar modules. Installation of solar energy in Germany in 2009 exceeded the amount expected, mainly due to the roof components for high-quality sustained demand. German Federal Foreign Trade and Investment Agency (GermanyTrade & Invest) will be at this year’s International Professional Exhibition solar photovoltaic (PVExpo) showcasing the world’s largest solar battery,dell market, the latest opportunities. This year’s PVExpo will be 3 to 5 March in Tokyo, Japan.

Germany’s newly installed capacity in 2009 could exceed 3.0GW, accounting for about a year half of the global PV market. This results in 2009 the Germans in the global installed solar capacity in the total share from 37% to nearly 50%.

  The new photovoltaic system installed in the small area of the roof unstoppable. Up to November 2009, the newly installed system, there are nine-tenths of the system capacity is less than the minimum 30kWp. One of the more popular high-grade solar modules. The Dell Y9943Dell Inspiron 630m battery vast majority of private users prefer the high-end components in a certain kind, and even high-end business users are also components of the selection. These figures show that for high-quality products, strong demand, while those with “Made in Germany” (MadeinGermany) mark means high quality.

Germany’s success in the field of photovoltaic key reason lies in its two-pronged approach: Industry support and market adoption. Germany’s solar industry has attracted many of the most famous institutions, including R & D institutions until the suppliers and manufacturers. At the same time, the German domestic market also received support from a number of interesting initiatives, such as the “Renewable Dell Inspiron 640m batteryDell Inspiron E1405 battery Act” (RenewableEnergiesAct, referred to as EEG), and EnvironmentalProtectionLoanProgram (Environmental Loan Scheme). These initiatives through the implementation of an attractive long-term electricity price subsidies and low-interest loans to reduce risk.

German Federal Foreign Trade and Investment Department will send representatives to participate in this year’s PVExpo, to discuss the world’s largest solar market business opportunities. East Exhibition Hall 4 Booth (EastHall4) 22 Zhi 26.

German Federal Foreign Trade and Investment Department of the Federal Republic of Germany’s foreign trade and inward foreign capital institutions. The organization seeks to expand its business activities to the German market for non-German companies to provide advice, and want to enter the German market outside Germany providing information on foreign trade.Dell Dell XPS M140 battery,Latitude D820 batteryLatitude D830 battery.

2010 Yingli expansion capacity of 400 MW total capacity of up to 1GW

Posted by admin on March 25, 2010
Netbook / Comments Off

March 24 morning news, based in Baoding Yingli Green Energy solar energy company, announced this year’s expansion of 400 MW capacity, total capacity will be expanded to 1 gigawatt (1,000 megawatts). The same time, new technology enabled the production of silicon materials,battery, is expected to cast off the photovoltaic production of high energy consumption, high pollution, high-cost “hat.”

Expansion of 400 MW capacity this year,

Yingli Green Energy announced that it will build a capacity in Baoding Headquarters, 300 megawatts of “Panda”, a complete industrial chain of single-crystal production line, including single-crystal ingot, slicing, battery manufacturing and component packaging sectors. It is reported that the expansion project will achieve the “Panda,” Efficient large-scale production of batteries.

It is reported that “Panda” efficient battery by Yingli Green Energy, Solar energy research institutes in Europe the Netherlands Energy Research Center (ECN) and the photovoltaic cell manufacturing equipment and automation systems supplier Amtech Corporation jointly developed. At present, in the “Panda” efficient battery-test line, photovoltaic cells, the average conversion efficiency of solar energy has reached 18%, and is expected to achieve large-scale production after the end of the battery, the average conversion efficiency will be at least 18.5%.

Coupled with the existing 600-megawatt capacity of Baoding, as well as Hainan, 100 MW under construction production capacity, total capacity of Yingli Green Energy will be the end of 2010 to reach 1 gigawatt (1,000 megawatts).

90% of the PV modules are sold to overseas markets

When asked “Why in the photovoltaic industry in the face of accusations of excess production capacity against the background of expansion of production capacity choice,” Yingli Green Energy Liansheng Miao, Chairman and Chief Executive Officer, said: “In 2010, the global PV market will continue to show growth, based on a large number of orders we receive and purchase intentions, battery,we decided to conduct a strategic expansion. ”

Ying Li believes that the adoption of the expansion project, not only to meet the market’s strong demand for Yingli products, but also through cell conversion efficiency and the expansion of production scale and further reduce costs.

It is reported that Yingli’s PV modules sales market, including Germany, Spain, Italy, Greece, France, South Korea, China and the United States, which accounted for only 10% of sales in the Chinese market. To expand our global influence, Yingli only recently meddled in the World Cup in South Africa to become the world’s first World Cup soccer tournament sponsored by the renewable energy company.

It is reported that Yingli in 2009 shipments of 525.3 MW, gross margin of 23.6%; expected in 2010 shipments of 950 megawatts to 1 gigawatt, annual growth rate of 86%, gross margin guidance of 27-29%.

Silicon material to produce new technology is expected to achieve zero pollution

Yingli Green Energy has a capacity of self-produced silicon materials in 2009, began construction of a silicon materials plant – 69 of silicon industry will enable the new technology the “new silane Law” production of silicon materials, this is the first domestic. PV is expected to take off the production of high energy consumption, high pollution, high-cost “hat.”

Yingli Green Energy Liuyao Cheng, vice president, said Siemens, improved with the traditional method compared to new technology the new silane Act has a number of advantages, improved conversion rate of silicon Siemens France only 20%, and the new Law on silane conversion rate can reach 90%, the remaining Transformation of silica is not re-enter the system circulation can also be transformed. The new method not only increases the silane conversion rate, and the raw material is a common sand.

In the energy context, using traditional modified Siemens Production of energy per kilogram of polysilicon 75-120 kWh, while the new technology of new energy-silane France only 25 per kilogram of electricity. Liuyao Cheng said that the new silane process production of photovoltaic components method, the production process energy components can be recovered within one year after use, while the general life of PV modules up to 25 years.

At the same time, improvement in the production process of Siemens method will produce toxic gases silicon tetrachloride, some manufacturers do not recall or simply buried, leading to environmental pollution; the new technology a new silane method, the production process does not produce toxic gases silicon tetrachloride, subsidiary the product of hydrogen and sulfate can be collected using the production process can achieve zero pollution.

It is reported that Yingli Green Energy has been cutting costs of space, according to estimates, one-watt PV modules currently in production cost of 1.35 U.S. dollars. Miao Liansheng revealed that at present there Yingli almost every two days, a technical advance, the cost will be further compressed. According to this progress in 2012 in the European market, battery,Yingli PV modules and conventional power generation costs will be the cost of flat.

Better batteries with twist of phosphate

Posted by admin on March 18, 2010
Netbook / Comments Off

The Austin, Texas-based company announced Monday that it has developed a new technology that offers longer battery life and will cost less than current lithium-ion batteries.

In a nutshell, the company is replacing cobalt with phosphate as the cathode material in its lithium-ion batteries, allowing them to be more stable and less expensive, according to Valence Chief Executive and President Stephan Godevais.

Valence is calling the new technology Saphion, and devices using the battery technology are expected to hit the market as early as this spring. Godevais added that notebook manufacturers are likely to be the first to adopt the new battery technology.

Innovations in batteries are few and far between, and many are looking to fuel cells as the next generational leap. But Godevais said that leap may be further off than expected.

“There is little doubt that fuel cells will be big,” Godevais said, “but Saphion will be the battery technology of choice for the next 10 years, until fuel cells begin to take over.”

Analyst reaction to the Valence announcement was mixed.

One analyst, who asked to remain anonymous, wondered whether the company could get the batteries to market.

“Many companies are making innovations but have found that transferring something from the labs to the street is often a challenging process,” the analyst said.

Sara Bradford, an analyst with market consulting firm Frost & Sullivan, agreed that getting the word out would be a hurdle, but she said battery manufacturers have been asking for just this kind of technology.

Richard Doherty of market research firm The Envisioneering Group said Valence’s strong intellectual property puts it in a good position. The company has more than 790 issued and pending patents worldwide, including 284 issued in the United States.

Godevais said batteries using the new technology would cost 30 percent to 40 percent less than batteries using cobalt and that notebooks using similarly sized batteries would last about two hours longer with Saphion than with cobalt.

Valence also announced on Monday at the Demo 2002 conference in Phoenix, a portable battery system, called the N-Charge, which will recharge and run two mobile devices simultaneously. The battery will be able to power multiple devices and eliminate the need for multiple adapters or additional batteries.

The N-Charge will use the Saphion technology and power a notebook for 10 continuous hours or a cell phone for five days worth of talk time. The battery is expected to be available in the spring.dell vostro 1520 battery,dell vostro 1700 battery,dell vostro 2510 battery.

NTT DoCoMo recalls cell phone batteries

Posted by admin on March 12, 2010
Netbook / Comments Off

The company issued the recall for the D06 series batteries manufactured by Sanyo GS Soft Energy, a subsidiary of Sanyo Electric, through May 2006. The batteries were used in all FOMA D902i handsets and in some D902iS and D903i handsets. The issue could impact as many as 1.3 million handset batteries, according to an advisory the company released.

The problem is due to deformed electrode plates installed in the batteries, the company said. If the batteries are accidentally subjected to a strong external impact that results in a surface dent or similar depression, the deformed plates could pierce the batteries’ internal insulation, resulting in an electrical short during, or right after, charging.

NTT DoCoMo confirmed that at least one D06 battery has ruptured due to the problem and that 17 other cases of D06 batteries overheating have been reported. The Mainichi Daily News reported that in one case the cell phone battery exploded and a user suffered burns. NTT DoCoMo supposedly noticed defects with the batteries after receiving complaints from customers in March, the Mainichi Daily News reported. But the article noted that NTT DoCoMo failed to announce the trouble and recalled batteries only in response to complaints on an individual basis.

All D902i handset owners will be mailed letters informing them that they will receive a replacement battery.

Owners of the D902iS and D903i handsets, which might use the faulty batteries, are also being contacted and asked to check if their batteries bear any of the specified three-letter codes: OKA, OLA, PAA, PBA, PCA, PDA or PEA. Replacement batteries will then be sent to users accordingly, NTT DoCoMo said.

Sales of the D902i, D902iS and D903i have been suspended for the time being.

Lithium ion batteries, which came out in 1990, have been used by many cell phone and notebook manufacturers because they can hold more energy than conventional rechargeable batteries and generally weigh less than traditional rechargeables. But a short circuit inside a lithium ion battery can cause the battery case to melt and spew hot liquids, or explode due to pressure and heat. Injuries caused by these defects have been reported around the globe.

This summer the problem impacted several notebook computer makers. In August Dell recalled 4.1 million notebook lithium ion batteries and Apple Computer recalled 1.8 million batteries because under certain conditions they exploded into flames. And in September Panasonic recalled 6,000 notebook batteries sold in Japan.

Li-ion battery electric vehicles practical concern in the economy

Posted by admin on March 06, 2010
Netbook / Comments Off

As the hybrid and electric vehicles become increasingly close to the production of lithium-ion battery safety concerns have begun to shift from the economic practicality. At the recent meeting plug-in cars in a panel discussion, several speakers said that once such an advanced battery to achieve mass production, significant cost reduction is possible.
Members of this advanced battery safety has not expressed concern over the battery in the past, consumer electronics products, there had been overheating and fires.

Johnson Controls-Saft Advanced Battery Systems for hybrid battery system of government affairs and external relations director Michael Andrew, said the company’s goal is to lithium-ion battery packs cost-cutting by 50%.

He said, JCI-Saft battery materials into consideration not only the cost but also consider the dell battery mode of production. He said that the battery manufacturers can learn how other industries can be more efficient production of lithium-ion battery experience.

Andrew said, “We now have an opportunity to overhaul the production of these batteries.” “We think we can learn from other industries used in the process technology, to rapidly reduce costs.”

Evenly matched with gasoline

He said, JCI’s goal is to produce for the use of hybrid or electric vehicle dell studio 1737 battery packs, allowing consumers to spend and spend three years of the same gasoline engine.
Nissan North America manufacturing engineering and vehicle manufacturing engineering, said Mark Swenson, vice president of Nissan in 2012 to reduce the cost of type Leaf electric car plan involves manufacture of batteries and battery in the vehicle manufacturing plant will be assembled into battery packs.

A123 Systems Inc.’s Vice president of Business Development Ric Fulop said he believes that as the industry matures, the cost of the battery pack can be reduced by 9% per year. To make a stronger dell vostro 1000 battery power can save some costs, while also optimizing production processes and the use of high-quality materials to cut other costs.

More Power

Dow Chemical Co.’s Global business development director of the Department of Ravi Ramanathan said that the cost of the battery power can also make a stronger and more efficient batteries, as well as quality control during production to be cut out.

Automobile manufacturers do not talk about hybrid and electric vehicle dell vostro 1320 battery packs used in cost. However, some estimated to be Chevrolet Volt lithium-ion batteries used in the cost estimate of about 8,000 U.S. dollars.

Ramanathan said, “the high cost of the dell vostro 1400 battery, you must come down.” He said that the initial cost may be high, because the car manufacturers of cars and batteries to over-designed to ensure that consumers do not appear on the technical loss of goodwill mechanical failure.

Wind power industry will usher in the shuffle

Posted by admin on March 05, 2010
Netbook / Comments Off

The development of new energy industries, much faster than the original plan anticipated. Some media reports, the state started the approval of wind power and other new energy projects often break through the established planning, not only on the total amount of fast, and the size of the project is also seeking a single large one after another across the country compete to build 10 million kilowatts of “wind power the Three Gorges.” For the wind power of this emerging industry, the rapid rise of the national grid Energy Research Institute, vice president of Hu Zhaoguang that “promote the rapid development of China’s wind power industry is driven by national policy orientation, affected by the extent of more than 50%.”

At the national policy support and energy supply of the background, the rapid rise of wind power equipment manufacturing industry, becoming the eyes of many enterprises a new economic growth point, the fan industry has also become synonymous with the myth of wealth.

The global financial crisis, China’s wind power has also spawned a rapid expansion of manufacturing capacity. The financial crisis for many electrical appliances export enterprises have a great impact, so that the amount of exports have been shrinking dramatically. At this point, a group of considerable strength of large-scale enterprises, listed companies have entered the wind power equipment manufacturing.

Only a few years of the proposed projects, China has become, following the United States, Germany,Spain, after the world’s fourth largest wind power state. According to statistics, the domestic wind power machine manufacturers from 2004 to 2008, the rapid expansion of several of the dell studio 14 battery more than 80, more than 50 fan manufacturers, tower tube manufacturers nearly 100.

 First half of 2009, in addition to five power generation groups, the China Guangdong Nuclear Power Group, the State Development and Investment Corporation, China Energy Conservation Investment Corporation, etc. have entered the field of wind power has been the industry’s so called “central enterprises under the new energy gamble feast.”

At the same time, wind power produced high profits has driven a growing number of companies chasing. The nation’s largest fan manufacturer — Golden wind technology, wind power machine had reached 29% of the gross profit margin, it is the wealth of myth raspberry been staged.

 In the wind power industry development in the context of the irrational, the local governments are also steadily increased its wind power equipment manufacturing industry efforts to attract foreign investment. In the past two or three years, wind power manufacturing capacity has exploded. In addition to dell studio 1435 battery Dongfang Electric Group’s early entry into the field of wind power production, the Tianwei insurance change, Shanghai Electric, and the North re-Turbine Motor, Hunan Electric shares, and so have access to their fields. 
 
All these factors led to the expansion of wind power industry took to the road of madness.

 Beginning in 2004, the number of wind power equipment manufacturing business growth of more than 10 times. Wind power installed capacity increased by 25 times. The rapid pace of wind power development, but also so that in 2007 issued by the State in 2020 30 million kilowatts in the long-term development goals, just two years after outdated. In 2010, the domestic wind power capacity may well break this goal.  

Data show that first half of 2009, China Wind Power Equipment output reached 4.27 million kilowatts, an increase of 135.7%. In 2009 China’s new wind power installed capacity is expected to only 800 million to between 9 million kilowatts, while the present, China’s wind dell studio 1436 battery equipment manufacturing companies before 4, production capacity had reached 12 million kilowatts is the “Eleventh Five-Year Plan” of the two times. According to the plan, in 2010 China’s wind power equipment, production capacity of more than 20 million kilowatts, and the annual wind power installed capacity of 1,000 kilowatts. 

 Some experts believe that, with a similar trajectory of development of traditional industries, new energy projects rush into mass action, while wind power industry, the tendency to duplicate the building, and many manufacturing firms to switch manufacturing wind power equipment, but there is no independent R & D core technology, mass-produced homogenization of the project is serious.

An informed source revealed that at present wind power equipment companies, some enterprises in the fish in troubled waters, and some R & D capability is very weak, high profits, driven by wind power launched, the products are purely generic. At the same time, wind power has dell studio 1535 battery  kicked off a price war.

 Expert analysis, wind power machine equipment industry has become an inevitable reshuffle. If the “God wanted people to perish, we must first make people crazy,” used in the wind power industry, the disorder caused by expansion of excess capacity, so that China’s wind power equipment manufacturing industry is facing a severe cut-throat competition

National Development and Reform Commission, said Li Junfeng, deputy director of the Energy Research Institute, “to meet future market demand, wind power equipment business just a few are good enough, but now there are more than 80.” Experts believe dell studio 1536 battery that “survival of the business first and foremost is to rely on independent innovation to master core technologies. In the case of large-scale production, the reliability of its products is especially important. particularly in the harsh climatic conditions to achieve many years of safe operation, there is no set of scientific quality management system and a high level of manufacturing technology can not be achieved. “ 

 ”The wind power industry production capacity, they would rather grow a bit slower, but to a solid point, in order to meet the future needs of a large-scale wind power development.” China Academy of Engineering, Ni says. Since the majority of our wind power manufacturers through the introduction of technology into the field of wind power is still in by the “technology transfer and the digestion and absorption” to “independent innovation” stage, while the wind power equipment, the lack of core technology development of the industry has become a “soft rib. ” Therefore, the fostering independent intellectual property rights will be the wind power industry in China’s long-term goal to address the fans in the operation of product quality problems without dell studio 1537 battery delay.

The battery has backed cache

Posted by admin on March 01, 2010
Netbook / Comments Off

Adaptec has announced the immediate availability of a Series 5Z Unified Serial (SATA/SAS) RAID controller family with “Zero Maintenance Cache Protection.” It’s designed to replace the current generation of RAID controllers that use lithium ion batteries to protect data in cache memory.

This announcement is significant for two reasons. First, its shows the expanding role of NAND flash. Recently, NAND flash has been associated with the second coming of solid state disk (SSD) in enterprise disk arrays. In spite of reliability issues (the more flash APPLE memory is written to, the less reliable it becomes over time), silicon vendors including Samsung and Intel now claim that flash can be made ready for prime-time data center applications by using a “wear leveling” process. Vendors like EMC and Sun have agreed by implementing flash as “Tier 0″ storage within their arrays.

Adaptec is now using it for another application: NAND flash coupled with Supercapacitor technology to back up RAID controller cache in case of a system or power failure. RAID controllers use cache memory to accelerate I/O performance between the host system and disk. At any given moment during normal operations, there could be hundreds of write operations waiting to be transferred from cache to disk that. In the case of system or power failure, those could be lost. RAID controller vendors often deal with this exposure by including an optional battery power capability that A1175 keeps cache (i.e. RAM) powered-on for between 48 and 72 hours.

Here Adaptec does it a bit differently. It uses 4GB of NAND flash coupled with Supercaps to preserve I/O transactions stuck in cache. In case of a system or power failure, transactions in cache are destaged to NAND, to be “replayed” when normal functioning is returned. In this application, reduced reliability over time is not an issue since the NAND flash would be used in rare occasions, as a failure recovery mechanism.

The elimination of batteries to support cache backup is the second reason this announcement is significant. Engineers who design RAID controllers have kept up with the advance of battery technology over the years. Here, good batteries are those which are small and MacBook Pro 15 inch battery powerful. Consequently, many have preferred to use the lithium ion variety.

But there is some pain involved. Lithium ion A1078  have to be “conditioned” before they are put into productive use. Their operating temperature has to be controlled. They also require periodic testing, as they have a limited life-span. Many fail completely after three years. These shortcomings require that users periodically test the batteries, a process that forces the removal of cache from the I/O path during testing. Finally, vendors who ship products with lithium ion batteries outside the US have to endure a border-crossing “red tape” process which they say can be a royal pain.

With delivery of the 5Z Series, Adaptec has replaced batteries altogether with Supercaps. Like batteries, Supercaps hold a charge over time but work from a different electrical principle. In the 5Z design they are used to power the data de-stage operation from cache to NAND flash storage. Unlike lithium ion A1045, they can be put into productive use immediately, don’t need to be checked periodically, and won’t get held up when crossing the border.

It’s a breakthrough that other vendors of RAID controllers are also working toward. You can expect to see competitors release NAND/Supercap cache backup before the end of the year. For now, Adaptec stands alone. But it is likely that PowerBook G4 15 battery-backed cache is about to take a spot in the museum of computing history.